2MIL Transparent Safety Window Film UV Blocking Heat Insulation Window Tint Security Protection Sticker Self Adhesive Glass Film,Light Blue,17.5Inch x 6.5Feet

Package included: 1* Window Film 2* window film installation Guide Installation Steps: Step 1. Measure the window surface (target surface)，and Trim films to the size you want (leave an extra inch is better) Step 2. Keep the window or glass clean and spray much soapy water Step 3. Peel off transparent back film (Use 2 pieces of tape to stick to the corner and pull it apart) Step 4. Wet the adhesive side with much soapy water Step 5. Install the film onto the window Step 6. Use the squeegee to remove excess water and bubbles. (From top to bottom, from the middle to the sides) Step 7. Cut off the edge and enjoy your work Key Features: 💕Material: PET Self-adhesive Thickness: 2mil VLT(Visible Light Transmission): About 70% 💕UV CONTROL & ENERGY SAVING: Protects your skin against harmful sun rays, reduces discoloration and aging of furniture. 💕SELF ADHESIVE: Self adhesive film's service life is much longer than the common non-adhesive films in the market, it is easy to install with soapy water in minutes, and easy to remove , it can reinforce glass strength. Once the glass is hit by an unexpected impact,it can stick the fragments to some degree and protect your skin from harm.

• 【PROTECT YOUR SECURITY】- The film can absorb impact from break-in attempts and reinforce glass strength. Once the glass is hit by an unexpected impact, it can hold shattered glass together in case of breakage and protect your skin from harm.
• 【Functions】- Filter the Sunlight, reduce glare, protect the skin and vision.Heat control. Energy saving and environmental protection. protect the skin, prevent furniture aging, fade.Since it maintains the transparency of the window, you can now enjoy the warmth of the sunlight without having to worry about harmful UV rays.
• 【DIY FRIENDLY】- Please make sure you have removed the protective film before you apply the adhesive film to glass. Use two pieces of tape to grab onto one of the corners on each side of the film. Once you start pulling apart the tape, the backing liner should start to peel off from the window film itself. Remember to closely follow the installation manual and use lots of soapy water to prevent the air bubble.
• 【WIDE APPLICATION】- Bathroom,living room,sliding doors,children's window glass,cabinet mirrors,Senior housing,villas,shopping malls,jewelry stores,frontage stores,airports,railway stations,docks,kindergartens,schools,banks glass security.
• 【NOTE】- In order to easily remove the liner protect backing film, simply use 2 pieces of tape to apply to both sides of the corners and pull. And please spray as much soapy water as possible on the glue side and glass before putting it on the window