Electric Bike Bicycle LED Display KT LED-900S 36V 48V E Bike Display Matches Controller for Ebike Accessories Parts

AttentionThis KT LED900S monitor is only compatible with KT controllers. They have the same communication protocol. Before placing an order, please confirm that your controller is KT (KunTeng) brand.LED900S 36/48V are compatible. Waterproof Connector: The length of the cable is about 21 cm and cannot be directly connected to the controller. A 1to4 cable is required.ParameterType: KT-LED900S DisplayVoltage: 24V, 36V, 48VColour: BlackWeight: 200GGrip size: Φ22.2mmCable length: SM Plug, 180cm, Waterproof Plug 23cmConnector plug: 5-pin connector

• Please watch the video on the homepage carefully and check the label on the controller so that it won't work after purchase.This is very important!
• KT LED900S electric bicycle display screen uses LED lamp beads to display information such as speed and battery power
• The up and down buttons on the display panel can adjust the gear of PAS. If you press and hold the up or down button, you can turn on the headlight function and the 6KM auxiliary push function.
• When battery power capacity is greater than 80%, all 4 LED indicator are lit. When the battery capacities drop, the indicators are off in order. When the power capacity is less than 20%, the last indicator is flashing (L side). When the controller is under-voltage protection, all 4 LED indicators are power off, which means that the vehicle is currently shutdown due.