Facmogu Standard Hi Hat Clutch 7Mm, Aluminum Hi Hat Clutch Drum Clutch For Cymbal Stand, Hi Hat Cymbal Clutch Jazz Drum Clutch C

Here'S How To Put Them Together: 1. Unscrew The Bottom Half Of The Clutch, And Remove The Bottom Screw And Felt. 2. Attach The Top Part Of The Clutch And Top Felt To The Top Hi Hat Cymbal. 3. Turn The Cymbal Over, And Underneath The Cymbal, Put The Felt Back Onto The Clutch. 4. Take The Removed Bottom Screw, And Screw It Back Onto The Clutch. Use The Top Screws To Adjust The Tightness Of Your Top Cymbal. 5. Finally, Put The Hi Hat Clutch And Cymbal Onto The Rod Of The Hi Hat Stand, And Tighten The Wingnut At Your Desired Placement. You Can Use The Pedal Of Your Stand To Help Get The Placement Just Right. 6. When All Is Said And Done, You Should Have The Two Felts Sandwiching Your Cymbal In Between Them, With Two Screws Above The Felts For Tightness Adjustment, And One Screw On The Bottom Holding Everything Together.