Homebrew Weldless Steam Condenser Set 1.5"TC Kettle Mount Indoor Brewers Boil Kettle Parts Stainless Steel joyful(1.5mm Sprayer Tip)

Homebrew Weldless Steam Condenser Set 1.5"TC Kettle Mount Many people are converting over to electric brewing systems allowing brewing indoors and even in quite confined spaces. At the same time they have to struggle with how to get rid of all the steam created during the brewing process, especially during the boil part of the brew process. In some cases, it is impossible or unreasonable to install fan-based exhaust system to vent that steam. Moisture collecting on your walls and ceiling, which can cause mold issues.Our Steam Condenser is a simple and un-expensive solution - Just drill a 41mm hole and mounts it to your brew kettle.The Steam Condenser requires pressurized water for proper operation and will consume around 0.4L per minute at 40 PSI.When the Steam Condenser is in operation, you can brew confidently in any enclosed space (basement, garage, kitchen, den, etc.) without ventilation.Not only will you get to the boil faster, but you will use less power overall to maintain a rolling boil as there will be less area for the heat to escape. How to UseStep 1 -Drill a 41mm hole on the kettle. This condenser can mounts on the top side of your kettle.Step 2 -Mount the Steam Condenser.Step 3 -Connect a cold water supply to the condenser.Step 4 -Connect a drain tube for the waste water. The waster water is very hot and can be used for cleaning.Product Type : Brew Pots & KettlesMaterial : Stainless SteelOrigin : Mainland ChinaWelcome Thank you for coming to our store!

• * Steam is very hot and can cause severe burns! Surfaces will be hot during and after use. Only handle this product while using proper burn protection equipment.
• * Always turn on the water supply to the steam condenser first, then provide power to heat the vessel after.
• *Never block the drain, this can cause the steam condenser to pressurize.