Peakora 12 Head Ultrasonic Mist Maker Fogger Stainless Steel Pond Mister Atomizer Fogger Humidifier Ip67 Aluminum Waterproof Power-Off Protection Use for Aquarium Rockery

<p>Description</p> <p>This is a high-quality atomizer with high safety performance. This atomizer is made of corrosion-resistant stainless steel and the power supply is made of waterproof all-aluminum, so it is very durable. In addition, this atomizer has high power, so the amount of fog is also very large. This atomizer is suitable for homes, yards, offices, restaurants, bars, parks, hotels, etc.</p> <p><br></p> <p>Details</p> <p>Waterproof Round Connector: The connector between the atomizer and the power supply is a special customized waterproof round connector. This connector can effectively prevent water from entering the plug, increasing the safety of this atomizer.</p> <p>Two Buoys: This atomizer comes with two hollow plastic buoys. You can adjust the height of the buoys by adding water to them. According to the buoys' height, you can adjust the height of the atomizer.</p> <p><br></p> <p>Application</p> <p>This atomizer is suitable for homes, yards, offices, restaurants, bars, parks, hotels, etc.</p> <p><br></p> <p>Specification</p> <p>Color: Silver&nbsp;</p> <p>Power Supply Material: Aluminum&nbsp;&nbsp;</p> <p>Atomizer Material: Stainless Steel</p> <p>Voltage: 110v 60HZ</p> <p>Power Supply Size: 23.5*12*5.6 cm/9.25*4.72*2.2inch</p> <p>Atomizer Size: 28*6.8*6cm/11.02*2.68*2.36inch</p> <p>Package Size: 35*17*23cm/13.8*6.7*9inch</p> <p>Atomizer Cord Length: 5m/16ft</p> <p>Net Weight: 3.6kg /7.94lbs</p> <p>Package Weight: 3.75kg/8.3lbs</p> <p><br></p> <p>Package Included</p> <p>1* Power Supply&nbsp;</p> <p>1* Atomizer</p> <p>2* Buoys</p> <p>4* Screws</p> <p>2* The Cover Of The Buoy&nbsp;</p> <p>1* Atomizer Cord</p> <p><br></p> <p>Notes</p> <p>1.When installing this atomizer, please be sure to use our switching power supply or power transformer and rectifier board.&nbsp;</p> <p>2.Due to the large working current of the rectifier, the rectifier board must be added with an aluminum heat sink, the effective area of the heat sink can not be less than 1000cm², to ensure that the square bridge heat dissipation is good.</p> <p>3.The fog produced by the atomizer must be drilled by using a fan, and each group of atomizers is recommended to retain 360cm² flat space to ensure that the water temperature is below 50℃.</p> <p>4.The atomizer is not suitable for atomizing corrosive liquids. In order to keep the atomizer in normal working condition, it is recommended to clean the surface of the atomizer and shell at least once every two weeks.</p> <p>5.After using the nebulizer for more than 5000 hours, the nebulizer will be aging and the fog volume will be small, then the new nebulizer must be replaced in time.</p> <p>6.Please allow the slight color difference caused by the shooting light and 1-3 cm error due to manual measurement, and make sure you do not mind before ordering.</p>

• Good Humidification Effect: This atomizer has 12 fog heads, and each head can spray fog evenly. 12 heads running at the same time can quickly spray enough fog to humidify a room. Compared to small humidifiers, it has a faster and better humidification effect.
• High-quality Materials: The power supply of this atomizer is a waterproof power supply made of aluminum. The atomizer is made of stainless steel which is corrosion resistant and dissipates heat well. The atomizer made with these materials has a long service life.
• High Safety: This atomizer comes with a water cut-off automatic protection sensor. As long as there is no water under your atomizer, it will automatically power off and no longer operate.
• Waterproof Power Supply Shell: The atomizer's power supply shell has a waterproof rating of IP67, so the power supply will not be damaged or leak because of rain or contact with water. So even if you put it outdoors, you don't have to worry about the machine will be damaged or leaking.
• Thoughtful Design: There is a power indicator light on the atomizer. The power indicator light allows you to eliminate the problem of the atomization board and the power supply as quickly as possible.
• Thoughtful Design: This atomizer and its power supply are designed with small holes on the side for easy fixing. If you want to fix the atomizer in one place, you can use screws to fix the atomizer or power supply in these holes.
• Sloping Design: The surface of the atomizer is designed with two slopes. This design allows for a larger amount of fog to be dispersed. In addition, it makes the fog disperse evenly. In this way, the sprayed fog will look prettier.