Thread Repair Tool, Corrosion Resistance Stainless Steel Thread Insert Kit, High Strength For Thread Repairing High Voltage Switchgear

17 Pcs Thread Inserts M12x1.5 Female Thread Repairing Accessory Assortment Kit<br/>Specification:<br/>Item Type:Thread Sleeve<br/>Material:Stainless Steel<br/>Thread Insert Size:M12x1.5 Length:2D<br/> <br/><br/>Package List:<br/>1 x Spiral Drill1 x Screw Tap1 x Wrench1 x Break Pin Tool1 x Hex Wrench12 x Thread Repair Insert <br/><br/>Note:<br/>InstructionsDrill holes using a matching drill bit.Use wire threaded special tap tapping, the tapping depth must exceed the wire screw sleeve mounting length.Insert the wire screw into the mounting wrench with the tail down. Turn the wrench handle to screw the wire screw into the threaded hole.Use a break pin tool to align the mounting handle tail with a hammer to strike the punching tool and the tail handle can be removed.When there is a problem with the installation of the threaded screw sleeve, such as a jumper, the threaded sleeve can be taken out by the wire threading tool.

• The wire screw set is placed in the screw hole of the workpiece such as aluminum alloy to form a standard internal thread with high strength, wear resistance and high accuracy

• In case of threading error or repair of a damaged internal threaded hole, the threaded hole can be economically and effectively repaired by using a threaded sleeve as a means of repair. The same screws can also be after repair.